Описание

2V Series Valve 2V025-08 - высокопроизводительное и качественное оборудование компании Airtac. Вся продукция бренда изготавливается на самом современном технологическом оборудовании и сертифицирована по стандарту системы менеджмента качества ISO 9001:2008, что гарантирует ее бесперебойную работу, надежность и длительный срок эксплуатации.Продукция Airtac применяется для различных промышленных сегментов рынка, таких как упаковочная промышленность, медицина, машиностроение, легкая промышленность и другие сферы производства.
2V025 series1. Direct acting and normally closed type 2/2 way solenoid valve. Its high sensitivity allows it to change direction quickly.2. The structure is small and compact.3. The valve body is made of brass which is heat resistance and the coil conforms to Class B classification. The seals are made of fluorine rubber (VITON) which is suitable for several types of working medium.2V130 and 250 series1. This 2/2 way diaphragm piloted solenoid valve has low energy consumption and large air flow .2. The starting pressure is low and the operational differential pressure is＜0.05MPa.3. The valve body is made of brass which is heat resistance and the coil conforms to Class B classification . The seals are made of NBR.1. Before installing, be sure the valve hasn't been damaged via transportation.2. The coil must be pure vertical, the inlet and outlet on body must be horizontal. it's suggested to use the medium lubricated by 40μm filter element. Be aware of the flow direction and port size.3. Please notice whether the installation condition accords with technical requirements (such as “voltage”,“actuation frequency”, “working pressure” and “scope of application temperature”), then the equipment can be installed and used.4. Take measure to avoid vibration and frozen.5. Before using the fittings and tubes make sure they are clean. When connecting tofittings, be sure the PTFE Thread Seal Tape is used correctly.6. To keep the dust away, Default paragraph font.Never forget to install dirt-proof boot in air intake and outlet during dismounting.''